EZ-Kote, Inc.
The World's Leader in Semi-Permanent
 Water-Based Mold Release Agents
EZ-Kote MLEX-2
The 21st Century solution for mold release for Epoxies and Urethanes
EZ-Kote MLEX-2 Product Overview:
MLEX-2 is a non-transferring and environmentally friendly mold release designed specifically for urethane and epoxies. EZ-Kote releases the molded parts easily, allowing for immediate mold prep which aids in decreasing shot cycle time.
MLEX-2 is available in several formulations to meet the most exacting needs in mold release applications. The MLEX-2 is formulated for Urethane , RTV Silicone and FRP molds as well as metal molds including aluminum or steel. MLEX-2 gives a low gloss finish to the molded part and is excellent for shoe sole production where paintability and bondability are achievable without post part cleaning. Our new polymer formulation extends library life and resin flow while radically decreasing the degradation of the Silicon mold. MLEX-2 shields and protects silicone molds from urethane and epoxy reactions during molding.
EZ-Kote Advantages:
  • No wax build-up, allowing molds to stay cleaner up to 10 times longer
  • Reduces downtime between applications by providing a clean release
  • Contains no VOC’s
  • Instant curing helps reduce cycle time 
  • Is effective with Integral Skin Foam and Rigid Foams
  • Releases All Reinforced Plastics and Composites.
EZ-Kote Application Guidelines:
1. The Mold surface must be thoroughly clean and dry. Clean the mold with a proper cleaning agent to remove the existing mold release and contaminants.
2. Apply one to three coats of EZ-Kote to the mold from three different directions.
3. For molds in production apply a minimal coat from three directions and allow the film to completely dry. This should take only seconds.
4. Touch-up every 5th heat or as needed.

Product Specifications:

Click here for MLEX-2 Safety Data Sheet